Sandblasting glass is a technique for decorating glass either with designs or simply using the sandblasting all over for a shade effect. It is very popular all over the world. Often used on windows and doors.
The principle of operation of the machine:
The unit is designed for decorating glass by machining the surface of an air jet with particles of abrasive material. The installation allows continuous production of glass and matted art sandblasted glass.
Installation for sandblasting glass consists of a working chamber, mounted on metal, made in the form of welded supports on four legs interconnected by jumpers. The chamber is mounted at the bottom of the bunker for filling the abrasive mixture. The camera mounted blasting head, connected with flexible hoses feeding the abrasive and air under pressure.
The fence is due to the abrasive discharge arising in the process of passing a stream of air in the chamber head.
To work in automatic cycle set on the sand head carriage, which moves in the vertical direction through the mechanism of supply. Abrasive blasting is a method of closed-loop, which allows economical use of the abrasive mixture. Control of reciprocating movement of the print nozzle by limit switches. Dust is produced through the filter elements that provide the degree of air purification to 98%.
The bed and the camera setup
The bed installation of steel profile for maximum strength and rigidity.
limit switches to prevent "escape" for the acceptable range camera movements.
 The design of the camera and linear guide provides high precision movement.
The camera is a welded steel construction.
Primary protection guides (labyrinth protection) cannot enter the critical moving parts and dust and dirt.
The support wall is equipped with vacuum cups (for fixing work pieces).
Opening the front glass of the camera, you can get free access to the work zone.
A container with an abrasive to be in the camera
(Which allows you to create a practical closed loop)
Large abrasive particles get into the job again, and go through small ventilation portal.
The design of the ventilation system eliminates the additional installation of cleaning ventilation.
Consistency of parameters such as distance from the nozzle to the work piece, right angle between the longitudinal axis of the nozzle and the surface of the work piece, the velocity of the blast nozzle and the velocity of the abrasive, ensures high stability of the quality of treatment.
Drive installed
To move the camera with spray heads on the X and Y axes are used belts.
Linear guides with seals, with a carriage made of steel, mounted on polished rail.
Linear guides and pre-loaded bearings are corrosion-resistant coating.
Electrical cables and control cables are laid in the box machine.
Installation is controlled by a special panel.
The remote control allows you to specify different modes of processing (movement speed, start and end coordinates of the blast nozzle, air pressure, etc.).
Sand blasting machine ArtGlass |
Overall dimensions |
3800 х 3000 х 980 |
Maximum sheet size mm |
2800х1800 |
Weight, kg |
800 |
Chamber volume, m3. |
1,3 |
Travel speed, m / min |
7 |
Productivity, m2/hour |
3 |
Area spray, mm |
20-50 |
The thickness of the processed glass, mm |
3 - 20 |
Depression, kPa |
1 |
Compressed air pressure, at least, m3 |
2,5 |
Compressed air consumption, at least, m3 |
0,3 |
Weight of abrasive sand, kg |
20 |
Abrasive powder flow rate, kg \ m2 |
0,15 |
Maximum weight of glass, kg |
120 |
Consuming Power, kW (without air compressor) |
0,8 |
Power requirements: |
380 V, 50HZ |
NEW! CNC Sandblasting machine
A new modification of the machine sandblasting material additionally saves you time and money. Machine "sees" picture matting and only where necessary. The control system will allow you to control the process more efficient.
Options:
- Motor drive of the feeder head grit
- Motor drive of the feeder carriage M2
- The fan motor M3
- Boxes of resistance RP 1, RP 2
- Limit switches
- Electrical equipment
- Remote control
SAMPLES
|
